Pickup Parts & Kits

Flat head screws for humbucker mounting rings. Available in 13mm or 16mm length Supplied as a set of 4 13mm length for neck position 16mm length fo...

Slot head or Phillips head pickguard screws - suited for counter sunk scratchplate holes. Oval head. Available in sets of 11. Nickel finish - perfe...

Classic humbucker mountain rings for Les Paul type guitars available in black or cream. Flat top, curved bottom, suited for archtop guitars. Sold i...

Completely flat (non tapered) humbucker mountain rings available in black or cream. Flat top, flat bottom, suited for flat top guitars. Sold indivi...

Springs for pickup height adjustment - various. 8mm and 17mm springs are tapered. All other lengths are straight. *Sold in sets of 2*

Plastic humbucker mounting ring available in black or cream. Curved top and bottom, suited for archtop guitars. Sold individually. For taper, dimen...

Gavitt® 4 conductor wire for guitar pickups and toggle switches. This wire has four 28 AWG insulated conductors (red/white/black/green), plus a bar...

Single coil Strat® pickup covers in a range of colours. Available in: White Parchment Cream Black Mint Green Relic White Dimensions: Spacing: 52...

Flat humbucker mountain rings available in black or cream. Flat top, flat bottom, suited for flat top guitars. Sold individually. For dimensions an...

Height adjustment tubing typically used with single coil pickups. Sold in packs of 6 (suitable for a set of Strat pickups) or 6 inch lengths. Typic...

Nickel silver humbucker cover Made in the USA Available in 50mm or 53mm spacing. Dimensions: Polepiece Diameter: 0.214'' Height: 0.630'' Length: 2...

Sold as set of 2 Counter sunk single coil mounting screws

This DIY humbucker pickup kit includes all the parts you need to build your own humbucker, except the coil wire. Kits include: Alnico 5 bar magnet...

Nickel silver humbucker covers Available in 49.2mm or 52.00mm spacing. Dimensions: Polepiece Diameter: 5.2mm Height: 16.8mm Length: 69.7mm Width: ...

A set of top and bottom flatwork for Strat® single coil pickup construction. 1 x 0.093'' in. bottom vulcanized fibre board flatwork 1 x 0.062'' in...

Complete DIY Precision Bass pickup kit, ready for winding. Includes all parts (excluding the coil wire) Kit includes: Neck/bridge prebuilt bobbins...

P90 dog ear covers available in either black or cream. Dimensions: Polepiece spacing: 50.00mm Polepiece Ø: 5.5mm Total width: 41mm Total length: ...

P90 soapbar covers available in black or cream. Dimensions: Polepiece spacing: 50.00mm Length: 85mm Width: 35mm Height: 16mm Polepiece Ø: 5.5mm ...

Pre built and ready to wind Telecaster bridge pickup kit. All parts are included and ready for winding.  Kit includes: Alnico 5 magnets (magnetise...

Pre built and ready to wind Telecaster neck single coil pickup kit. Coil wire not included. Kit Includes:  Alnico 5 magnets 1 pre-built bobbin, bl...

NIckel plated Sold as a set of 6 3 x 19mm

Pre built bobbin kit for Strat® single coil. Including all parts excluding the magnet coil wire, all sets are ready for winding. Kit includes: Vin...

Jazz bass pickup covers in black (gloss) Available in both neck and bridge positions. For dimensions and string spacing, refer to drawings.

Nickel silver Telecaster® neck pickup covers. Choose from vintage or modern spec. Dimensions: Length: 65 mm Width: 14.5 mm Height: 15 mm 3 Tabs f...

Black pickup cover for Precision Bass pickups. Dimensions: String spacing: 56.4mm Polepiece Ø: 5.5mm Length: 57mm Width: 28mm Height: 14mm Sold ...

Set of six Alnico 5 rod magnets for single coil pickup construction. These magnets are un-bevelled and un-magnetised. Diameter: 0.187'' (4.75mm) Su...

DIY Jazz bass pickup kit - includes all parts except the magnet coil wire - ready for winding. Kit includes: Bevelled alnico 5 magnets Pre-built b...