Products

Resistors can play an integral part in a guitar circuit - subtle changes can make a dramatic difference to your tone. Checkout our video guides to ...

Using a 5B5-01 Free-Way blade switch, this harness allows 10 switch positions on your Strat®. The Free-Way 5B5 blade switch literally makes the mos...

2 pole 5 way superswitch manufactured by Oak Grigsby (Electroswitch). Dimensions: Body cavity depth required: 34.93mm Mounting screw spacing: 41.2...

3.2mm diameter heat shrink tubing. Supplied on 15m reels (49ft) Shrink ratio - 2:1 (3.2mm - 1.6mm)

A prewired Telecaster® upgrade - the Tele® 4 way mod gives you the glory of the classic 3 way switch tonal range, plus a new switch position enabli...

This Telecaster® wiring kit comes with a 4-Way OAK Grigsby switch giving the player an extra dimension compared to the classic 3-way switch. When ...

Our 6 way Telecaster harness adds an extra 3 switching positions to the standard 3 way wiring we all know and love. Featuring the incredibly discre...

0.5mm thick aluminium shielding plate that sits underneath the pickguard. The plate is held in place by the components themselves. These plates gro...

The classic Gibson® style bell control knob, as found on many high end and US guitars worldwide. This set will fit CTS pots and other imperial size...

Set of 2 brass sleeves for CTS pots that convert split shaft into solid shaft, therefore able to take screw fit control knobs. Sleeves are designed...

Mini toggle switches in either SPDT or DPDT format. Mini toggle switches have long been used in guitar wiring so enable extra switching options suc...

Guitar control knob pointers were commonly found on guitars in the good old days but have generally declined in recent years on factory models. A s...

50mm wide guitar copper shielding tape - perfect for creating that Faraday cage required to block external electrical interference generated by sta...

50m (164ft) reel of copper shielding tape. 0.06mm thickness x 50mm width Conductive adhesive.

CRL 3 way pickup selector switch. This is a traditional spring-action lever switch which was used on original 50s Stratocaster® and Telecaster® gui...

CRL 5 way pickup selector switch. This is a traditional spring-action lever switch. Suitable for all Strat® style guitars. Durable, reliable and no...

Bulk CRL blade switch. Supplied in packs of 10

1 Meg (1MA) audio taper CTS pot. Requires 1/4'' (6.35) screw fit control knobs. 10% resistance tolerance.

Solid shaft 500k CTS pot. Ideal for HS Telecasters and Telecaster Deluxe models. Takes 6.35mm (1/4'') screw fit control knobs. Thread Length: 7mm  ...

Selection of hardware used with CTS or other US sized pots and jack sockets. 3/8''- 32NEF hex nuts for CTS pots 3/8'' flat washers for CTS pots 3/8...

CTS pots are of the highest quality and have long been the "go-to" pots for luthiers, guitar tech's and players worldwide. They are also the first ...

Add an extra dimension to your playing with a push pull pot. CTS pots have long been the choice for high end US guitars (notably Fender and Gibson)...

Wiring kit to suit ES 335®, ES 355® and Casino/Dot type guitars. Our wiring kits consist of some of the best components available to r-wire your gu...

Prewired harness to suit Gibson® or Epiphone® ES 330®, ES 335® ES 355®, Dot and Casino style guitars. The perfect upgrade to imported far eastern m...